ASR5K-C4OC3-MM-K9 Cisco ASR 5000 CLC2 Channelized 4-Port STM-1/OC-3 Line Card w/MM SFP
$15,000.00
Transfer Rate : 10Mbps
Network : TD-SCDMA
Firewall : Yes
Asr5k-C4oc3-Mm-K9 : Cisco Firewall
Model Number : ASR5K-C4OC3-MM-K9
Application : Enterprise
Port Structure : Modular
Type : Wireless
Ports : ≥48
Category : Network Switches
Only logged in customers who have purchased this product may leave a review.
NEBS level 3, CISPR 22 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, CAN/CSA C22.2 No. 60950-1
Cisco EWDM-OADM4 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM (EWDM-OADM4= and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths:
•EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm.
•EWDM-OADM2—1560.61 nm, 1559.79 nm.
C2960X-STACK FlexStack-Plus is a hot-swappable, modular stacking solution that provides a true stacking capability, with all switches acting as a single switching unit with a unified data plane, using a single IP address. Cisco FlexStack-Plus is supported by the Cisco Catalyst 2960-X Series.
The Cisco CWDM passive optical system provides optical networking support for high-speed data communication for metropolitan area networks (MANs) over a grid of eight CWDM optical wavelengths in both ring or point-to-point configurations. The Single-Fiber 4-Channel Multiplexer/Demultiplexer allows you to multiplex/demultiplex four separate channels into one strand of fiber. Dual fiber is used for the connections to the GBICs and single fiber is used for the network connections. The two models (CWDM-MUX-4-SF1 and CWDM-MUX-4-SF2) must be used together to create a four-channel single-fiber point-to-point link. This module uses the same CWDM GBICs as all of the other CWDM OADMs.
There are no reviews yet.