ASR5K-011G2-SX-K9 Technical Specifications
Cisco ASR 5000 GLC2 1-Port 1xGbE Line Card – 2nd Gen w/SX MM SFP
ASR5K-011G2-SX-K9 Cisco ASR 5000 GLC2 1-Port 1xGbE Line Card – 2nd Gen w/SX MM SFP
ASR5K-011G2-SX-K9 Cisco ASR 5000 GLC2 1-Port 1xGbE Line Card – 2nd Gen w/SX MM SFP
ASR5K-011G2-SX-K9 Cisco ASR 5000 GLC2 1-Port 1xGbE Line Card – 2nd Gen w/SX MM SFP
Only logged in customers who have purchased this product may leave a review.
Cisco EWDM-OADM4 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM (EWDM-OADM4= and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths:
•EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm.
•EWDM-OADM2—1560.61 nm, 1559.79 nm.
The Cisco 2-Channel SFP WDM Transponder expands the range of applications and platforms supported by coarse wavelength-division multiplexing (CWDM) and dense wavelength-division multiplexing (DWDM) pluggable optics solutions from Cisco. It supports any client, any protocol, and any speed between 155 Mbps (OC-3/STM-1) and 2.488 Gbps (OC-48/STM-16).
The 4-Channel OADM allows you to add/drop four channels (with different wavelengths) into one direction of an optical ring. The 4-channel OADMs are transparent to the 1300-nm wavelength and includes a 1300-nm/1500-nm filter to mix legacy SONET/SDH/ATM ring installations with CWDM installations on the same optical fiber.
Cisco CWDM-OADM4-2 Channels CWDM OADM Module (1550 1570 1590 16100).The Cisco ® WDM series comprises a set of 11 new CWDM passive modules mechanically compatible with the Cisco CWDM chassis (part number CWDM-CHASSIS-2=) and a 1300/1550 nm splitter cable. Compared to the previous 1000BASE-CWDM series of passive filters, this new set of devices sports a greatly reduced insertion loss (up to 50 percent), “power-tap” ports to allow live monitoring and troubleshooting of the CWDM signals, as well as the mixing of 1300-nm CWDM signals on the same fiber infrastructures.
There are no reviews yet.