ASR5K-011GE-LX-K9 Technical Specifications
Cisco ASR 5000 GELC Ethernet 1000 Line Card w/LX Single-Mode SFP
ASR5K-011GE-LX-K9 Cisco ASR 5000 GELC Ethernet 1000 Line Card w/LX Single-Mode SFP.
ASR5K-011GE-LX-K9 Cisco ASR 5000 GELC Ethernet 1000 Line Card w/LX Single-Mode SFP.
ASR5K-011GE-LX-K9 Cisco ASR 5000 GELC Ethernet 1000 Line Card w/LX Single-Mode SFP.
Only logged in customers who have purchased this product may leave a review.
Cisco CWDM-OADM4-2 Channels CWDM OADM Module (1550 1570 1590 16100).The Cisco ® WDM series comprises a set of 11 new CWDM passive modules mechanically compatible with the Cisco CWDM chassis (part number CWDM-CHASSIS-2=) and a 1300/1550 nm splitter cable. Compared to the previous 1000BASE-CWDM series of passive filters, this new set of devices sports a greatly reduced insertion loss (up to 50 percent), “power-tap” ports to allow live monitoring and troubleshooting of the CWDM signals, as well as the mixing of 1300-nm CWDM signals on the same fiber infrastructures.
The Cisco CWDM passive optical system provides optical networking support for high-speed data communication for metropolitan area networks (MANs) over a grid of eight CWDM optical wavelengths in both ring or point-to-point configurations. The Single-Fiber 4-Channel Multiplexer/Demultiplexer allows you to multiplex/demultiplex four separate channels into one strand of fiber. Dual fiber is used for the connections to the GBICs and single fiber is used for the network connections. The two models (CWDM-MUX-4-SF1 and CWDM-MUX-4-SF2) must be used together to create a four-channel single-fiber point-to-point link. This module uses the same CWDM GBICs as all of the other CWDM OADMs.
Cisco EWDM-OADM4 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM (EWDM-OADM4= and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths:
•EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm.
•EWDM-OADM2—1560.61 nm, 1559.79 nm.
A single FlexStack connection between two members is a full duplex 10Gbps connecton. Each Cisco Catalyst 2960-S member supports two FlexStack connections. Each FlexStack member can simultaneously send and receive Ethernet traffic over both stack links at line rate, effectively giving 20Gbps of stack bandwidth per member.
There are no reviews yet.