AIM-ATM Technical Specifications
Cisco HIGH PERFORMANCE ATM Advanced Network Module
Manufacture Part Number : AIM-ATM
Manufacture : Cisco
Type : Network Module
Modules
AIM-ATM Cisco HIGH PERFORMANCE ATM Advanced Network
AIM-ATM Overview
Cisco HIGH PERFORMANCE ATM Advanced Network Module
$38.00
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Modules
EWDM-OADM4, 4-channels EWDM OADM Module
EWDM-OADM4 Overview
Cisco EWDM-OADM4 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM (EWDM-OADM4= and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths:
•EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm.
•EWDM-OADM2—1560.61 nm, 1559.79 nm.SKU: ewdm-oadm4 -
-
Modules
C2960S-STACK Cisco Catalyst 2960s Flexstack Stacking Module
C2960S-STACK Overview
Cisco FlexStack Module provides a true stacking solution with all Catalyst 2960S Series switches in a FlexStack stack acting as a single switching unit when the module is installed in all switches. FlexStack provides a unified data plane, and single configuration for a group of stacked Cisco Catalyst 2960-S switches.
SKU: C2960S-STACK -
Modules
WS-SUP32-GE-3B, Cisco Catalyst 6500 Supervisor 32
WS-SUP32-GE-3B Overview
Supervisor Engine 32 offers a robust feature set at a low cost entry point for the wiring closet. Because it comes standard with the PFC3B, Supervisor Engine 32 offers feature consistency with the Supervisor Engine 720. Supervisor Engine 32 comes in two versions: 8×1 Gigabit Ethernet (GE) Small Form-Factor Pluggable (SFP)-based ports or 2×10 GE XENPAK-based ports.
Supervisor Engine 32 requires the high-speed fan tray when operating in the Cisco Catalyst 6500 chassis. As such, a minimum of 2500W AC (in either 110V or 220V mode) or DC power supply is required for operation in a 6-, 9-, and 13-slot chassis. It requires a minimum of 950W in the 3-slot chassis. Supervisor Engine 32 also can operate in the E-Series chassis or a Cisco 7600 Series RouteSKU: WS-SUP32-GE-3B
There are no reviews yet.