Refurbished AIR-AP1810W-D-K9 Cisco Aironet 1810W Access Point

Refurbished AIR-AP1810W-D-K9 Technical Specifications

Cisco Aironet 1810W Access Point

Authentication and security
Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
802.1X, RADIUS authentication, authorization and accounting (AAA)
802.11i
Software
Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.2.111.0 or later
Maximum clients
Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
2×2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC)
20-, 40- and 80-MHz channels
PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic shift diversity (CSD) support
Ethernet ports
Authentication with 802.1X or MAC filtered
Dynamic VLAN or per port
Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)
Integrated Bluetooth 4.1 (including BLE) radio
Maximum transmit power: 5 dBm
Antenna gain: 2 dBi
Integrated antennas
2.4 GHz, gain 2 dBi
5 GHz, gain 4 dBi
Interfaces
One 10/100/1000BASE-T PoE uplink port
Management console port (RJ-45)
Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
◦ PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR-D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af
One passive pass-through port RJ-45 (back to bottom)
DC power connector
Indicators
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Per-port status for local Ethernet ports
For privacy, LEDs are automatically turned off when the access point joins a controller. LEDs may be enabled to be administratively – see configuration guide.
Dimensions (W x L x H)
Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm)
Weight
Access point without mounting bracket or any other accessories: 1.2 lb (560 g)
Environmental
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,500m)
Operating temperature: 32° to 104°F (0° to 40°C)
Operating humidity: 10% to 90% percent (noncondensing)
Operating maximum altitude: 40°C, 9843 ft (3,000m)
System
512 MB DRAM
256 MB flash
1.4 GHz system dual-core CPU
Input power requirements
44 to 57V DC
Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz
Powering options
802.3af/at Ethernet switch
Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Optional Cisco local power supply (AIR-PWR-C= or AIR-PWR-D=)
Power draw
Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with 6.49W PoE out and 27.65W with 12.95W PoE out (when powered using AIR-PWR-C or AIR-PWR-D)
Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on the uplink port and 100m of cabling on the PoE out port.