AIR-AP1832I-H-K9C Cisco Aironet 1832i Access Point

 AIR-AP1832I-H-K9C Technical Specifications

Cisco Aironet 1832i Access Point

Compliant Standards VCCI, ICES-003, FCC Part 15.247, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, ARIB STD-T66, ARIB STD-T71, EMI, EN 300 328, FCC OET Bulletin 65c, EN 301 489-1, CAN/CSA-C22.2 No. 60950-1
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 1 Gbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2 (draft 5.0)
Frequency Band 2.4 GHz, 5 GHz
Status Indicators Status
Features DFS support, Wi-Fi Multimedia (WMM) support, Maximum Ratio Combining (MRC), 3T3R MIMO technology, 802.1x authentication, cyclic shift diversity (CSD), beamforming technology
Encryption Algorithm AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac (draft 5.0)
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 – 90% (non-condensing)
General
Device Type Wireless access point
Ruggedized Design Indoor
Width 8.3 in
Depth 8.3 in
Height 2 in
Weight 3.11 lbs
Localization China
Processor / Memory / Storage
RAM 1 GB
Flash Memory 256 MB
Expansion / Connectivity
Interfaces 1 x 1000Base-T (PoE+) – RJ-45 ¦ 1 x console – RJ-45 ¦ 1 x USB 2.0 – Type A
Power
Power Over Ethernet (PoE) Supported PoE+
Voltage Required AC 120/230 V / DC 44 – 57 V (50 – 60 Hz)
Power Consumption Operational 16 Watt
Antenna
Antenna Internal
Directivity Omni-directional
Software / System Requirements
OS Provided Cisco Mobility Express
OS Required Cisco Mobility Express