AIR-AP2802I-G-K9 Cisco Aironet 2802i Access Point

AIR-AP2802I-G-K9 Technical Specifications

Cisco Aironet 2802i Access Point

Cisco Unified Wireless Network Software Release 8.2.111.0 or laterCisco IOS®XE Software Release 16.3
Supported wireless LAN controllers

Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless ControllerCisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series SwitchesCisco Mobility Express
802.11n version 2.0 (and related) capabilities

4×4 MIMO with three spatial streamsMaximal ratio combining (MRC)802.11n and 802.11a/g beamforming20- and 40-MHz channelsPHY data rates up to 450 Mbps (40 MHz with 5 GHz)Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)802.11 dynamic frequency selection (DFS)Cyclic shift diversity (CSD) support
802.11ac Wave 1 capabilities

4×4 MIMO with three spatial streamsMRC802.11ac beamforming20-, 40-, and 80-MHz channelsPHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)802.11 DFSCSD support
802.11ac Wave 2 capabilities

4×4 MU-MIMO with three spatial streamsMRC802.11ac beamforming20-, 40-, 80, 160-MHz channelsPHY data rates up to 5.2 GbpsPacket aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)802.11 DFSCSD support
Integrated antenna

Flexible radio (either 2.4 GHz or 5 GHz)

2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio

5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)

2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)Cisco offers the industry’s broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios
Smart antenna connector

Available on the 2802e Series access points onlyRequires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access pointRequired when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio
Interfaces

2802I/E
◦ 2×100/1000BASE-T autosensing (RJ-45)

Management console port (RJ-45)USB 2.0 (enabled via future software)
Indicators

Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)

Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
Weight

Cisco Aironet 2802i

3.53 lb (1.6 kg)
Cisco Aironet 2802e

4.6 lb (2.09 kg)
Input power requirements

802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)802.3at power injector (AIR-PWRINJ6=)
Power draw

26W at the PSE with all features enabled except for the USB 2.0 port30W at the PSE with the USB 2.0 port enabled
Environmental

Cisco Aironet 2802i

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)Nonoperating (storage) altitude test: 25˚C, 15,000 ft.Operating temperature: 32° to 104°F (0° to 40°C)Operating humidity: 10% to 90% (noncondensing)Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 2802e

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)Nonoperating (storage) altitude test: 25˚C, 15,000 ft.Operating temperature: -4° to 122°F (-20° to 50°C)Operating humidity: 10% to 90% (noncondensing)Operating altitude test: 40˚C, 9843 ft.
System memory

1024 MB DRAM256 MB flash