hot-plug / redundant (plug-in module)
AC 85-264 V
250 Watt
for ASR 1001-X
$1,314.00
Manufacturer :CISCO DS HARDWARE DIRECT
Brand :Cisco
Product Line :Cisco
Packaged Quantity :1
General
Subcategory :Power supplies
Product Type :Power supply – hot-plug / redundant
Power Device
Form Factor :Plug-in module
Power Supply Compatibility :Network hardware
Power Provided :250 watt
Voltage Required :AC 85-264 volt
Only logged in customers who have purchased this product may leave a review.
The Cisco WS-CAC-4000W-INT is the 4000 W AC-input power supply designed for use with the high performing Catalyst 6509-V-E Switch. All Catalyst 6500 series AC-input power supplies, including the WS-CAC-4000W-INT, require single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. This is the international component. Users in the United States should purchase the WS-CAC-4000W-INT.
If you’re in need of a power supply, the Cisco WS-CAC-6000W may be exactly what you need. A hot-plug, plug-in AC Power module, the Catalyst 6500 6000W is compatible with all Cisco Catalyst 6500 Series Switches. The product, as its name suggests, provides 6000 Watts of output power if both inputs are 220 VAC and 2900W if both inputs are active, but at least one of the inputs is at 110 VAC or a single input is active and at 220 VAC. While many AC power modules produce 2500 – 4000 watts of AC power, the WS-CAC-6000W provides a higher wattage power supply which will be able to support future PoE devices. In short, it’s a good investment whether or not upgrading to a higher-performance system is in your future plans. As a replacement model the recommended (and minimum) CatOS is 8.4(1) and recommended (and minimum) IOS (12.2S train) is 12.2(18)SXD.
There are no reviews yet.