B-EX3400-24P-3S-E Juniper EX Series EX3400-24P Switch


B-EX3400-24P-3S-E Overview

EX3400 Ethernet Switches are a cost-effective solution for highly demanding converged data, voice, and video enterprise access networks. The compact, fixed-configuration 1U devices offer levels of performance and management. This model offers 24 10/100/1000BASE-T ports, the EX3400 switch also supports IEEE 802.3af Power over Ethernet for powering networked telephones, video cameras, wireless LAN access points, and other IP devices. Four front-panel dual-mode (GbE/10GbE) SFP/SFP+ uplink ports and two 40GbE QSFP+ ports are also available for connecting the switches to upstream devices. The EX3400 supports Juniper’s unique Virtual Chassis technology for interconnecting up to 10 switches that can be managed as a single device. The EX3400 can also be configured as a satellite device in a Junos Fusion Enterprise deployment, which aggregates large numbers of access switches into a logical management platform.

$2,015.00

B-EX3400-24P-3S-E Technical Specifications

Juniper Networks EX Series EX3400-24P Switch 24 Ports Managed Rack Mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks EX Series
Model :EX3400-24P
Kit :E-Rate Bundle
Packaged Quantity :1
Chassis
Airflow Direction :Front to back airflow
Processor
Installed Qty :1
Clock Speed :1 GHZ
RAM
Installed Size :2 GB
Flash Memory
Installed Size :2 GB, 2 GB
Performance
Performance :Throughput: 214 Mpps, Switching capacity (64-byte packet size): 288 Gbps
Capacity
Capacity :Virtual interfaces (VLANs): 4093, VLAN Spanning Tree Protocol instances: 510, LAG groups: 128, Multiple Spanning Tree Protocol instances: 64, Maximum member ports per LAG: 16, IGMP snooping entries: 1000, IPv4 hosts: 36000, IPv6 routes (Multicast): 2000, Maximum of neighboring networks: 8000, QoS hardware queues per port: 12, IPv4 routes (Multicast): 4000, ACL entries: 1500, ARP entries: 8000, IPv6 hosts: 18000
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Form Factor :Rack-mountable
Stackable :Stackable
Max Units In A Stack :10
Ports Qty :24
Advanced Switching :Layer 3
Routing Protocol :RIP-1, RIPng, IS-IS, MSDP, RIP-2, Static IPv4 routing, CIDR, Static IPv6 routing
MAC Address Table Size :32000 entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :RMON 2, SNMP 3, CLI, SNMP 2c, RMON 3, Telnet, RMON 1, SNMP 1, HTTP, HTTPS, RMON 9, SSH, TFTP
Power Over Ethernet (PoE) :PoE+
PoE Budget :370 watt
Features :sFlow, Auto-uplink (auto MDI/MDI-X), Access Control List (ACL) support, Non-Stop Bridging (NSB), Cable Diagnostics Function, Tagged VLAN, BOOTP support, Rapid Spanning Tree Protocol (RSTP) support, ARP support, Front to back airflow, VLAN support, Energy Efficient Ethernet, Internet Control Message Protocol (ICMP), Strict Priority (SP), DHCP client, Temperature sensor, Multiple Spanning Tree Protocol (MSTP) support, Port mirroring, System log, Multiple VLAN Registration Protocol (MVRP), DHCP relay, Per-VLAN Spanning Tree Plus (PVST+), Redundant trunk group (RTG), DHCP server, ICMP Router Discovery Protocol (IRDP), Smoothed Deficit Weighted Round Robin (SDWRR), Management Information Base (MIB) II, Spanning Tree Protocol (STP) support, Zero Touch Auto Provisioning, Dynamic ARP Inspection (DAI), IP Precedence, RARP support, Virtual Chassis technology, Class of Service (CoS), DiffServ Code Point (DSCP) support, Non-Stop Routing (NSR), Virtual Route Forwarding-Lite (VRF-Lite), DiffServ support, MACsec support, NTP time synchronization, Graceful Route Engine Switchover (GRES), SNTP support, Quality of Service (QoS), DHCP snooping, Store and forward, DoS attack prevention, DHCP proxy, VLAN Spanning Tree Protocol (VSTP), Neighbor Discovery Protocol (NDP), Captive Portal, Management Information Base (MIB), IPv6 support
Compliant Standards :IEEE 802.3at, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1p, IEEE 802.1ab (LLDP), IEEE 802.1x, IEEE 802.3, IEEE 802.1BR, IEEE 802.1w, IEEE 802.1Q, IEEE 802.3ae, IEEE 802.1D, IEEE 802.1s, IEEE 802.3ad (LACP), ANSI/TIA-1057, IEEE 802.1ak, IEEE 802.3af, IEEE 802.3u, IEEE 802.1ag, IEEE 802.1ae, IEEE 802.1ad
Ports
Qty :24
Type :10/100/1000 (PoE+)
Ports (2nd)
Qty :4
Type :Gigabit SFP / 10 Gigabit SFP+
Ports (3rd)
Qty :2
Type :40 Gigabit QSFP+
Interface Provided
Interfaces :4 x 10Gbit LAN SFP+ uplink/stacking, 1 x serial management, 2 x 40Gbit LAN QSFP+ uplink/stacking, 1 x 100Base-TX RJ-45 management, 24 x 1000Base-T RJ-45 PoE+ – 30 W
Power Device
Type :Internal power supply
Power Consumption Operational :110 watt
Miscellaneous
Color Category :Gray
Manufacturer Selling Program :E-Rate program
Height (Rack Units) :1
Encryption Algorithm :MD5, PEAP, TTLS, TLS
Authentication Method :Secure Shell v.2 (SSH2), TACACS+, Extensible Authentication Protocol (EAP), RADIUS
Compliant Standards :EN 60825-1, CB, CISPR 22 Class A, TUV GS, RoHS 6/6, FCC CFR47 Part 15 A, EN 55022 Class A, VCCI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, ICES-003 Class A, UL 60950-1 Second Edition, EN55024, EN 300 386, CAN/CSA C22.2 No. 60950-1 Second Edition, cUL
Dimensions & Weight
Width :17.2 inch
Depth :13.8 inch
Height :1.7 inch
Weight :12.65 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :113 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :10 – 85% (non-condensing)
Humidity Range Storage :0 – 95% (non-condensing)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.