DS-X9334-K9 Cisco MDS 9000 SAN Extension Module

DS-X9334-K9 Technical Specifications

Cisco MDS 9000 SAN Extension Module

General
Device Type Expansion module
Form Factor Plug-in module
Networking
Ports 16Gb Fibre Channel x 24 + 10Gb FCoE x 8
Connectivity Technology Wired
Cabling Type Fibre Channel
Data Link Protocol 10Gb Fibre Channel over Ethernet (FCoE), 16Gb Fibre Channel
Fibre Channel FC-DA, FC-FLA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-LS, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5, FC-BB-4, FC-IFR, FAIS, FAIS-2, FC-PI-5, FC-LS-2, FC-SP-2, FC-SB-4, FC-DA-2, FC-MI-3, FC-MSQS, FC-BB-6, FC-SB-5
Network / Transport Protocol IPSec, FCIP, SFTP
Remote Management Protocol RMON, SNMP 3, SSH-2, CLI
Status Indicators Power, system
Features Hot swap module replacement, Syslog support, IPv6 support, Virtual Route Redundancy Protocol (VRRP) support, Quality of Service (QoS), RADIUS support, Automated Attendant (IVR), Internet Control Message Protocol (ICMP), Role-Based Access Control (RBAC), Authentication, Authorization and Accounting (AAA)
Compliant Standards IEEE 802.3z, IEEE 802.1Q
Expansion / Connectivity
Interfaces 24 x 16Gb Fibre Channel – SFP+ | 8 x 10Gb Ethernet – SFP (mini-GBIC) | 1 x RS-232 – RJ-45 | 2 x 1000Base-T – RJ-45
Miscellaneous
Encryption Algorithm IKE, IKEv2
Compliant Standards CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, AS/NZS 3260, ICES-003 Class A, EN 60825, HMAC, AS/NZS 3548 Class A, EN 61000-3-1, IEC 60825, CAN/CSA C22.2 No. 60950, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, 21 CFR 1040, TS001
Dimensions & Weight
Width 15.9 in
Depth 21.8 in
Height 1.7 in
Weight 17 lbs
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 – 90% (non-condensing)
Compatibility Information
Designed For Cisco MDS 9706 Multilayer Director, 9710 Base Config, 9710 Multilayer Director, 9710 v2 Base Config, 9718 Chassis