Finisar FTLX1612M3BTL 10GBASE-ER OC-192 IR2 1550nm XFP Transceiver Module
$0.00
Hot plug gable XFP Transceiver Module
Supports 9.95Gb/s to 11.3Gb/s bit rates 10 Gigabit Ethernet
Supports 8.5Gb/s Fibre Channel in CDR Bypass mode
40km reach over Single mode Fiber (SMF)
Temperature-stabilized 1550nm +800 ps/nm EML
Built-in digital diagnostic functions
3.3V and 5V power supplies required
LC Duplex connector
Industrial temperature range -40°C to 85°C
Only logged in customers who have purchased this product may leave a review.
The Cisco 1000BASE-T Gigabit Interface Converter (GBIC) is an ideal solution for Catalyst ® 6500, 4000, 3550, 2950, 3500 XL and 2900 XL Series switch customers, providing full duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructures. This GBIC technology leverages the industry’s flexible, standards-based 1000BASE-X design, allowing for a simple and low-cost migration path to Gigabit Ethernet. There are two key product applications for the Cisco 1000BASE-T GBIC: connectivity to high-end workstations and distribution and wiring closet interconnectivity.
GLC-LH-SM is the 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable.
The Cisco ® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC) solution allows enterpris companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks.The product set helps enable the flexible design of highly available, multiservice networks.The Cisco CWDM GBIC solution is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and Fibre Channel in campus, data-center, and metropolitan-area access networks. The CWDM-GBIC-1470 is Cisco 1000BASE-CWDM 1470 nm GBIC.
EX-SFP-10GE-SR for Juniper Networks Equipment and it’s Juniper Networks part number is EX-SFP-10GE-SR. This transceiver is 100% functionally tested. The transceiver is a hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a fiber-optic network.
There are no reviews yet.