Finisar’s 40km DWDM FTLX3613M3xx Small Form Factor 10Gb/s XFP transceivers
comply with the current XFP Multi-Source Agreement (MSA) Specification1
$717.00
Supports 9.95Gb/s to 11.32Gb/s 10 Gigabit Ethernet
bit rates
100GHz channel spacing on the
ITU C-band
Hot plug gable XFP footprint
Temperature-stabilized 1550nm
EML transmitter
Supports -300ps/nm to +800ps/nm
3.3V and 5V power supplies
required
LC Duplex connector
Power dissipation < 3.5W
Built-in digital diagnostic functions
Commercial temperature range:
0°C to 70°C
Reference clock not required
Only logged in customers who have purchased this product may leave a review.
EX-SFP-10GE-SR for Juniper Networks Equipment and it’s Juniper Networks part number is EX-SFP-10GE-SR. This transceiver is 100% functionally tested. The transceiver is a hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a fiber-optic network.
The Cisco 1000BASE-T Gigabit Interface Converter (GBIC) is an ideal solution for Catalyst ® 6500, 4000, 3550, 2950, 3500 XL and 2900 XL Series switch customers, providing full duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructures. This GBIC technology leverages the industry’s flexible, standards-based 1000BASE-X design, allowing for a simple and low-cost migration path to Gigabit Ethernet. There are two key product applications for the Cisco 1000BASE-T GBIC: connectivity to high-end workstations and distribution and wiring closet interconnectivity.
The industry-standard Cisco Rugged SFP (Mini-GBIC) Transceiver Module is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFP can be used and interchanged on a wide variety of Cisco products.
The QFX5200 fixed-configuration access switch is ideally suited for leaf deployments in nextgeneration IP fabric networks. It features line-rate, high-density QSFP+/QSFP28 ports that support 10GbE, 25GbE, 40GbE, 50GbE, and 100GbE connections. Offering an advanced L2, L3, and MPLS feature set, network operators can use the QFX5200 to build large, high-density IP fabrics that support upgrades to 25GbE servers, network virtualization, and intelligent traffic forwarding based on proven, Internet-scale technology. The QFX5200 also supports a disaggregated version of Junos software in which control plane and data plane processes and functions run in parallel to maximize utilization of the highperformance quad-core CPU
There are no reviews yet.