MPO Connector
Showing 1–24 of 31 results
-
Network Cables
 ONS-CCC-100G-10 Cisco Fiber Optic Network Cable
 ONS-CCC-100G-10 Overview
Cable Type: Fiber Optic
Cable Length: 32.81 ft
Connector on First End: 1 x MPO Network
Connector on Second End: 1 x MPO Network
Features: Active
Device Supported: Network Device
Compatibility: Cisco Trunk Cards:
15454-M-100G-LC-C=, 15454-M-CFP-LC=,SKU: Â ONS-CCC-100G-10 -
Transceivers
FTLC8221RFNM Transceiver Module
FTLC8221RFNM Overview
Fibre Optic Transmitters, Receivers, Transceivers 10x10G Parallel VCSEL, 10x10G PIN, 10x 10GBASE-SR, extended-reach 100GBASE-SR10 100GbE, 103.1Gb/s, RoHS/lead free, multimode, CFP2, 3.3V, 6W, MPO receptacle, 0/70 C operation, 300mSKU: FTLC8221RFNM -
Transceivers
FTLC8281RCNM Finisar 100GBASE-SR10 100m 100GbE
FTLC8281RCNM Overview
Fiber Optic Transmitters, Receivers, Transceivers 10x10G Parallel VCSEL, 10x10G PIN, 100GBASE-SR10 100m 100GbE, 103.1Gb/s, RoHS/lead free, multimode, CFP, 3.3V, 12W, MPO receptacle, 0/70 C operation, 100m
SKU: FTLC8281RCNM -
Transceivers
FTLQ8181EBNM Transceiver Module
FTLQ8181EBNM Overview
Fibre Optic Transmitters, Receivers, Transceivers 4x10G Parallel VCSEL, 4x10G PIN, 40GBASE-SR4 100m 40GbE, 41.2Gb/s, RoHS, multimode, CFP, flat top, 3.3V, 6W, MPO receptacle, -0/70 C operation, 100m on OM3, 150m on OM4SKU: FTLQ8181EBNM -
Transceivers
FTXD02SL1C SNAP12 Parallel Transmitter and Receiver Modules
FTXD02SL1C Overview
Finisar’s SNAP12 transmitter and receiver modules are designed to be used in links of up
to 32 Gigabit per second over multimode fiber. They are RoHS-6 compliant and leadfree per Directive 2002/95/EC1
, and Finisar Application Note AN-20382SKU: FTXD02SL1C -
Transceivers
JNP-QSFP-100G-SR4 Juniper Networks QSFP28 Transceiver
JNP-QSFP-100G-SR4 Overview
The optical transceivers installed in QFX Series devices support digital optical monitoring (DOM) and digital diagnostic monitoring (DDM). DDM not only performs optical monitoring but also electrical monitoring, such as power supply voltage.
SKU: JNP-QSFP-100G-SR4 -
-
Transceivers
QFX-QSFP-40G-ESR4 Juniper Qsfp 40GBASE ESR4 OPTICS
QFX-QSFP-40G-ESR4 Overview
The QFX5200 fixed-configuration access switch is ideally suited for leaf deployments in nextgeneration IP fabric networks. It features line-rate, high-density QSFP+/QSFP28 ports that support 10GbE, 25GbE, 40GbE, 50GbE, and 100GbE connections. Offering an advanced L2, L3, and MPLS feature set, network operators can use the QFX5200 to build large, high-density IP fabrics that support upgrades to 25GbE servers, network virtualization, and intelligent traffic forwarding based on proven, Internet-scale technology. The QFX5200 also supports a disaggregated version of Junos software in which control plane and data plane processes and functions run in parallel to maximize utilization of the highperformance quad-core CPU
SKU: QFX-QSFP-40G-ESR4