Juniper Redundant DC Power Entry Module For Juniper MX960 Router
Manufacturer Juniper Networks, Inc
Manufacturer Part Number PWR-MX960-DC-R
Brand Name Juniper
Product Name Redundant DC Power Entry Module
Product Type Power Module
Compatibility
Juniper MX960 Router
Only logged in customers who have purchased this product may leave a review.
Supervisor Engine 32 offers a robust feature set at a low cost entry point for the wiring closet. Because it comes standard with the PFC3B, Supervisor Engine 32 offers feature consistency with the Supervisor Engine 720. Supervisor Engine 32 comes in two versions: 8×1 Gigabit Ethernet (GE) Small Form-Factor Pluggable (SFP)-based ports or 2×10 GE XENPAK-based ports.
Supervisor Engine 32 requires the high-speed fan tray when operating in the Cisco Catalyst 6500 chassis. As such, a minimum of 2500W AC (in either 110V or 220V mode) or DC power supply is required for operation in a 6-, 9-, and 13-slot chassis. It requires a minimum of 950W in the 3-slot chassis. Supervisor Engine 32 also can operate in the E-Series chassis or a Cisco 7600 Series Route
The module allows stacking over SFP+ ports and provides stacking bandwidth of up to 40 Gpbs over longer distance. It can be used to stack switches across wiring closets on different floors of a building or across different buildings in a campus.
The 4-Channel OADM allows you to add/drop four channels (with different wavelengths) into one direction of an optical ring. The 4-channel OADMs are transparent to the 1300-nm wavelength and includes a 1300-nm/1500-nm filter to mix legacy SONET/SDH/ATM ring installations with CWDM installations on the same optical fiber.
Cisco EWDM-OADM4 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM (EWDM-OADM4= and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths:
•EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm.
•EWDM-OADM2—1560.61 nm, 1559.79 nm.
There are no reviews yet.