WS-C2960L-SM-48PS Technical Specifications
Cisco Catalyst 2960L-SM-48PS Switch 48 Port
Hardware
Product Line: Cisco Catalyst
Product Series: 2960L
Ports
48 Port Network Switch
Cable
Connectivity Details Length :0.7 in
Connectivity Details Type :Console cable
Cable Details
Included Qty :2
Capacity
Type :Active VLANs
Value :256
Type :Egress port queues
Value :Up to 8
Type :IPv4 routes (static)
Value :16
Type :IPv6 groups (Multicast)
Value :1024
Type :IPv6 routes (static)
Type :Maximum transmission unit (MTU) (bytes)
Value :9198 byte
Type :SPAN sessions
Value :4
Type :STP instances
Value :64
Type :VLAN IDs
Value :4094
Dimensions & Weight
Depth :11.5 in
Height :17.5 in
Weight :10.08 lbs
Width :1.7 in
Environmental Parameters
Humidity Range Operating :5 – 90%
Humidity Range Storage :5 – 95%
Max Operating Temperature :113 °F
Max Storage Temperature :158 °F
Min Operating Temperature :23 °F
Min Storage Temperature :-13 °F
Flash Memory
Installed Size :256 MB
Header
Brand :Cisco
Manufacturer :Cisco Systems
Product Series: 2960L
Model :2960L-SM-48PS
Packaged Quantity :1
Product Line :Cisco Catalyst
48 Port Network Switch
Interface Provided
Comments :PoE+
Connector Type :RJ-45
Qty :48
Type :1000Base-T
SFP Ports: 4 SFP+
Type :10GBase-X
Qty :1
Type :Console (USB)
Type :Console
Miscellaneous
Authentication Method :Kerberos, RADIUS, TACACS+, WebAuth
Color Category :Gray
Compliant Standards :AS/NZS 60950-1, AS/NZS CISPR22 Class A, CAN/CSA C22.2 No. 60950-1 Second Edition, CISPR 22 Class A, CISPR 24, CNS 13438 Class A, Directive 2011/65/EU, EN 300 386, EN 55022 Class A, EN 60950-1 Second Edition, EN 61000-3-2, EN 61000-3-3, EN 61000-4-5, EN55024, FCC CFR47 Part 15 A, ICES-003 Class A, IEC 60950-1 Second Edition, KN22 Class A, KN24, Plug and Play, RoHS, UL 60950-1 Second Edition, USGv6, VCCI Class A
MTBF :437,970 hours
Networking
Advanced Switching :Layer 3
Compliant Standards :Bluetooth 4.0, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Features :Authentication, Authorization and Accounting (AAA), Auto-negotiation, BPDU Guard, Bridge protocol data unit (BPDU), Cisco EnergyWise technology, Class of Service (CoS), DHCP support, DiffServ Code Point (DSCP) support, Dynamic Trunking Protocol (DTP) support, Energy-Efficient Ethernet (EEE), Enhanced QoS, Fanless, IGMP snooping, IP source guard, Link Aggregation Control Protocol (LACP), MAC Address Notification, Multicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Proxy ARP, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Rapid Reconfiguration of Spanning Tree (RSTP), Shaped Round Robin (SRR), Spanning-tree Root Guard (STRG), Static routing, Switched Port Analyzer (SPAN), Uni-Directional Link Detection (UDLD), Unicast Storm Control, VLAN Trunking Protocol (VTP), Voice VLAN, Weighted Tail Drop (WTD)
Form Factor :Rack-mountable
Jumbo Frame Support :10240 bytes
Manageable :Yes
PoE Budget :370 W
Ports Qty :48
Power Over Ethernet (PoE) :PoE+
Remote Management Protocol :CLI, NTP, RMON 1, RMON 2, SNMP, SNMP 2c, SNMP 3, SSH, SSH-2, TFTP
Routing Protocol :IGMP, MLD, MLDv2, RIP
Smart :Yes
Stackable :Stackable
Status Indicators :Link/speed, Port duplex mode, Port status, System
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Type :Switch
Performance
Type :Forwarding bandwidth
Value :88 Gbps
Type :Forwarding rate
Value :77.38 Mpps
Type :Switching bandwidth
Value :176 Gbps
Ports
Qty :48
Type :10/100/1000 (PoE+)
Ports (2nd)
Qty :4
Type :10 Gigabit SFP+
Power Device
Frequency Required :50 – 60 Hz
Nominal Voltage :AC 120/230 V
Processor
Clock Speed :800 MHz
Type :ARM7
RAM
Installed Size :512 MB
There are no reviews yet.